Perler bead pattern maker

Perler Bead Pattern Maker

Upload a photo, pick Perler, Hama or Artkal colors and get a pattern split into 29 × 29 pegboards: one printable page per board, a bead shopping list per color and a preview of how it looks after ironing.

Free, no sign-upPerler · Hama · Artkal colorsBoard-by-board PDFBead count per color

In short: Linecraft's bead pattern maker converts a JPG, PNG or iPhone photo into a fuse bead pattern in your browser; the photo is never uploaded. Choose Perler (100+ colors), Hama Midi or Artkal S 5 mm, set the size in 29 × 29 boards and the number of colors. The free PDF has one page per board and a shopping list with bead counts plus 5% spare. Patterns up to 120 beads wide and 30 colors are free; a pro export (1 credit) goes to 300 wide and 60 colors.

Upload a photoJPG, PNG or iPhone HEIC · up to 15 MB · stays on your device
Or try a sample
Bead brand
103 colors · 5 mm midi beads · 29 × 29 square pegboards
Size in boards
1 × 1 = 1 board · about 14.5 × 14.5 cm (5.7 × 5.7 in) · free up to 120
Free up to 30 colors · pro export up to 60

Upload a photo or tap a sample. Your bead pattern appears here in about a second.

Photos turned into bead patterns

Photo of a dogThe dog as an ironed Perler bead design on 2 × 2 boards
Dog portrait, Perler, 2 × 2 boards. 58 × 58 beads, 14 colors.
Photo of a catThe cat as an ironed Hama bead design
Cat, Hama Midi, 2 × 2 boards. 58 beads wide, 12 colors.
Photo of sunflowersSunflowers as an ironed Artkal bead design on one board
Sunflowers, Artkal S, 1 board. 29 × 29 beads, 10 colors: a coaster in one evening.

How do you make a Perler bead pattern from a picture?

Pick a photo with one clear subject and crop it square. Decide how many pegboards you want: one 29 × 29 board makes a coaster-sized piece about 14.5 cm across, 2 × 2 boards (58 beads) suits a pet portrait. The maker shrinks the picture to one bead per square, groups similar colors and swaps each group for the closest real bead color of the brand you chose, measured with the CIEDE2000 color difference. Fewer colors give cleaner, more "pixel art" results; 8 to 16 is a good start. Print the board pages, lay each one under a clear pegboard (or follow it on screen), place the beads, then iron with parchment paper on both sides. The shopping list tells you how many beads of each color to pick out before you start.

  • Free: up to 120 beads wide and 30 colors, PDF with a small site footer
  • Pro export: 1 credit, up to 300 beads wide and 60 colors, no footer
  • Palettes: Perler, Hama Midi and Artkal S (5 mm), matched by CIEDE2000
  • PDF: cover with board map, one page per 29 × 29 board, bead list with +5% spare

How to turn a photo into a bead pattern

Upload and crop

Choose a photo (or a sample) and drag the square crop over the face or object you want in beads.

Pick the brand and board count

Choose Perler, Hama or Artkal and a size: 1, 2 × 2, 3 × 3 or 4 × 4 boards, or any width with the slider.

Set the colors

Lower the color count for a bold pixel look, raise it for shading. Leave the white background empty to save beads.

Check the ironed preview

Switch between the pattern, symbols and the ironed preview; merge or swap any bead color you don't own.

Print the boards and shop

Download the PDF: one page per board in order (A1 is top left) and a bead list per color with 5% spare.

Fuse bead pattern sizes: how many boards?

Midi beads (Perler, Hama Midi, Artkal S) are 5 mm, and the large square pegboards hold 29 × 29 beads. The maker draws red dashed lines where one board ends and the next begins, and the PDF gives each board its own page labeled like a map: row letter, column number.

BoardsBeadsFinished widthBeads (full square)
1 × 129 × 297.25 cm (5.7 in)841
2 × 258 × 5814.5 cm (11.4 in)3,364
3 × 387 × 8721.75 cm (17.1 in)7,569
4 × 4116 × 11629 cm (22.8 in)13,456

Ironed beads shrink slightly, so expect the finished piece to be a few percent smaller. Faces and pets need at least 2 × 2 boards for the eyes to read; logos and simple characters work on a single board.

Perler, Hama or Artkal colors

Each brand has its own colors and codes, so a pattern is only as good as the palette it was matched to. Pick the brand you actually own and the bead list will name codes you can find in your tubs.

  • Perler (US): the most common brand in North America; codes like 80-19001.
  • Hama Midi (Denmark): widely sold in Europe; codes H01 to H100-something, same color numbers across bead sizes.
  • Artkal S (5 mm): large palette with many in-between shades, sold in bags of 1,000 per color; good for portraits.

Mixing brands is fine on the same board because they are all 5 mm, but they melt at slightly different speeds, so iron a test patch first. Screen colors only approximate real beads; check the tubs in daylight.

Hama bead pattern generator tips for photos

  • Crop tight and square: every bead on the background is a bead not used on the face.
  • Switch on "leave white background empty" for subjects on white: no beads, no ironing gaps to fill.
  • 8 to 16 colors keeps the classic bead-sprite look; dithering mixes beads for smooth skies but scatters single beads that are slow to place.
  • Dark outlines help small designs read from a distance; merge near-identical colors so you buy fewer bags.

Reading the board pages

Every board page shows 29 × 29 squares with a symbol and color, bold lines every 5 beads for counting, and the bead counts for just that board underneath, so you can pick out the beads for one board at a time. The cover shows the full picture and the board map. The last page is the shopping list: code, color name, beads needed, beads to buy with 5% spare, and how many 1,000-bead bags that is.

Frequently asked questions

Is the Perler bead pattern maker free?

Yes. Patterns up to 120 beads wide (four boards across) and 30 colors download free as a PDF or PNG with a small linecraft.page footer. A pro export costs 1 credit and allows 300 beads wide, 60 colors and no footer; new accounts get 3 free credits.

Does it work for Hama and Artkal beads too?

Yes. Switch the brand and the pattern is re-matched to that brand's own colors and codes. All three use 5 mm midi beads on 29 × 29 square pegboards.

How many beads do I need?

The bead list counts every bead per color and adds 5% for beads that roll away. A full 29 × 29 board is 841 beads; a 2 × 2 design is 3,364.

Can I use mini beads?

The board pages are laid out for 29 × 29 midi pegboards. For mini beads (2.6 mm) use the same pattern on a mini board; the bead counts stay the same, the finished piece is about half the size.

Is my photo uploaded?

No. The pattern and PDF are made in your browser. A pro export only charges the credit and returns an unlock code.

Can I make a bead pattern by hand instead?

Yes: draw it square by square in the alpha pattern maker or the cross stitch pattern maker, then use the same grid for beads.

More ways to make a page